Πρώτη σελίδα
»
Υπολογιστές
»Καταχώριση #514783
€120
RME HDSP PCI V1.8 Card Interface for Multiface I/II, Digiface
Τελευταία ανανέωση: 21/4/2024 | Αρχική καταχώριση: 26/5/2022 | Εμφανίσεις: 637
Προϊόν:
Hardware
Τύπος:
Προσφορά
Κατάσταση:
Άριστη
Τιμή συζητήσιμη:
Όχι
Περιοχή:
Αττική
Πόλη:
Άγιος Δημήτριος
Παράδοση:
Κατόπιν συνεννόησης
Πωλειται σε αριστη κατασταση.
Based on the legendary Hammerfall PCI core with its innovative zero CPU load technology, the new PCI core developed for RMEs Digiface, Multiface and RPM, is optimized for even higher performance. Thanks to the latest chip technology, internal hi-speed RAM can be used faster and more efficient than external SRAM.
The PCI engine of the Hammerfall DSP System is built on a Zero wait state PCI Busmaster core. With up to 130 MB/s transfer rate in both directions the maximum performance available on the 32 bit PCI bus is used. Additionally the card offers highest compatibility by being 100% Plug & Play compatible under Windows and Mac OS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions (audio/MIDI.)
The connection between PCI card and I/O box is established using ordinary firewire cable (IEEE 1394, 6-pole.) The data transfer does not use Firewire protocol, but our own proprietary bus protocol. The supplied cable is 4 m (12 ft.) long. The PCI card operates as power supply for the attached I/O-box (Digiface, Multiface, Multiface II, RPM) over the FireWire cable.
Top
Technical Specifications
Short PCI 2.0 compliant PCI card, 32 bit, 3.3 V, PCI-X compatible
Zero wait state PCI Busmaster interface (130 MB/s transfer rate in both directions)
Secure BIOS Technology: card stays fully functional even when the flash process fails
Output: IEEE 1394 connector, RME bus protocol
Based on the legendary Hammerfall PCI core with its innovative zero CPU load technology, the new PCI core developed for RMEs Digiface, Multiface and RPM, is optimized for even higher performance. Thanks to the latest chip technology, internal hi-speed RAM can be used faster and more efficient than external SRAM.
The PCI engine of the Hammerfall DSP System is built on a Zero wait state PCI Busmaster core. With up to 130 MB/s transfer rate in both directions the maximum performance available on the 32 bit PCI bus is used. Additionally the card offers highest compatibility by being 100% Plug & Play compatible under Windows and Mac OS, and being able to share interrupts. The card itself will only use one interrupt (IRQ) for all functions (audio/MIDI.)
The connection between PCI card and I/O box is established using ordinary firewire cable (IEEE 1394, 6-pole.) The data transfer does not use Firewire protocol, but our own proprietary bus protocol. The supplied cable is 4 m (12 ft.) long. The PCI card operates as power supply for the attached I/O-box (Digiface, Multiface, Multiface II, RPM) over the FireWire cable.
Top
Technical Specifications
Short PCI 2.0 compliant PCI card, 32 bit, 3.3 V, PCI-X compatible
Zero wait state PCI Busmaster interface (130 MB/s transfer rate in both directions)
Secure BIOS Technology: card stays fully functional even when the flash process fails
Output: IEEE 1394 connector, RME bus protocol
Για να δείτε τα στοιχεία επικοινωνίας, θα πρέπει να συνδεθείτε ή να εγγραφείτε.
e-mail
